Custom Design Self-Adhesive Plastic Name Plates Stickers Signs for Electrical Industry
Product Name |
Custom Design Self-adhesive plastic name plates stickers signs for Electrical Industry |
Structure |
Substrate/ self-Adhesive glue/ Topcoat surface/ Surface coating, release film/ release coating/ plastic plates/ |
Adhesive |
Permanent Acrylic adhesive, pressure sensitive |
Material |
Mylar |
Alloy Film |
Polyester |
Size |
30/40/50/60/80mm wide 10/20/30/50mm long |
Initial tack (mm ) |
20 |
Ultimate adhesion (min) |
30 |
Color |
Black or Custom |
Surface finish |
Typeable |
Thickness |
Per buyers requirements |
Delivery time |
5-15 days |
Transportation |
Logistics or Air express |
Usage |
Electrical Name plate, Industry Name plate,Custom Name plate, Self-adhesive Name Plates, Custom sticker signs forIndustry |
Features |
Durable, Flexible |
Process |
Shearing, Die-cutting, dot line/Holes, Consecutive numbering, bar code numbers, corner, laminates, Coating |
Custom Design |
Yes, available in various Colors, Special effects, die-cutting shapes, shipped on Roll |
Test Result | |||
Items |
Test Standard |
Values |
Units |
Density |
ASTM D792 |
1.2 |
g/cm3 |
Light Transmission |
ASTM 1003 |
88-93 |
% |
Water absorption rate |
ASTM D570 |
0.35 |
% |
Haze |
ASTM D1003 |
less than1 |
% |
Tensile |
ASTM D882 |
61 |
Mpa |
Elongation |
ASTM D882 |
over 90 |
% |
Tear Strength |
ASTM D1922 |
30 |
Mpa |
Shock force |
ISO179 |
76 |
KJ/M2 |
UL Flammability |
UL94 |
N/A |
N/A |
0.25mm-1.0mm |
N/A |
V-2 |
N/A |
Super strong scratch resistant, surface hardnessupto 4H |
Self-Adhesive Name Plates for Multifunction Printer
Self-Adhesive Name Plates for Power Supply
How to get good performance of Adhesive tape?
In the bonding, follow these steps to enhance best adhesive effect:
1. Ensure adhesive surface clean and dry, it is generally recommended to take cloth.
2. 1IPA (isopropyl alcohol) and water mixture Clean the surface until the surface is completely dry.
3. After the solvent cleaned is dried, apply the adhesive tape to the adhesive surface and apply a pressure of around 15 PSI (1.05 kg / cm2) by a roller or other manner to allow effective adhesion.
4. Tear the release paper, and then stick it to the application surface, impose the same 15PSI pressure to make it effective fit. Next to remove air bubbles, increase the pressure to maximum limit.
5. Its best to do Adhesion at temperature of 15-38 , not less than 10 .
6. When operation, one end of the tape should be fit first, and then suppress the pressure to the other end in order to reduce the probability of air bubbles. Store at temperature 19-23 , humidity 40-60%.
Mibils Precision, founded in 2002, is a professional custom design self-adhesive plastic name plates stickers signs for electrical industry supplier in China, offering you the customized service. Welcome to buy the high quality label with competitive price from us.